880695-5001S G35-900 Standard rotation

Honeywell Garrett G-Series - The newest and most advanced generation turbocharger!

These very small turbocharger achieve extremely high performance with minimum space requirements.

Latest CFD-optimized, forged milled compressor wheel

High-Flow compressor housing with integrated easy plug speed sensor port

Rotation: Standard (Clockwise)

Dual ceramic ball bearing cartridges

Includes -4AN oil restrictor fitting with 1mm orifice

Four large water jacket ports

Twin piston rings at compressor and turbine site

MAR-M 1050°C turbine wheel

Water- and Oil cooled

Delivery: Super Core, 2 X -6AN water fittings and two plugs, 1 X oil restrictor -4AN

Compressor side: 

It  uses the latest generation of CFD-designed compressor wheels. These  wheels have up to 15% more flow on the 60mm wheels and up to 30% more  flow on the 67mm wheels (compared to the GTX GEN II).

The optionally available speed sensor can now simply be plugged into the compressor housing and is sealed via an O-ring.

Center Housing:

The center section is attached to the exhaust housing over an V-band and can thus easily rotate 360° into any position.

 Four large water connection options allow high cooling water throughput  and easy installation of the supply and discharge lines via two  supplied -6AN adapters.

For ease of mounting the oil supply, a -4AN oil restrictor with a 1mm orifice is included.

The  newly developed compact 8mm high-speed ceramic cartridge is shorter,  thinner and lighter than its predecessors. The space thus obtained  allows for the first time the use of twin piston ring seals on the  compressor and turbine side, which significantly reduce any oil leaks  from the bearing housing.

Turbine side: 

The  completely redesigned turbine wheel, made of the high-performance  material Mar-M, enables exhaust gas temperatures up to 1050° C. The flow  could also be increased by up to 15-20% compared to the GTX  turbocharger. And that with an efficiency up to 74%.

 Compressor side: 

Inducer ø

62.00mm Exducer ø

76.00mm Trim

65 A/R

0.72 

  Turbine side: 

Inducer ø

68.00mm Exducer ø

62.00mm Trim

84 A/R

N/A