Subframe bussningar A4/S4 B5

50% hårdare än original (durometer 85)

Passar alla B5 chassi.

WHAT THEY ARE: A new line of  solid filled rubber motor mounts made FOR us by OE suppliers to OUR specifications.

TRACK DENSITY Mounts are solid rubber mounts, but with an 85durometer approx 50% stiffer than stock, these are solid for all practical purposes and result in ZERO drivetrain movement. Vibrations from the engine are noticeably increased but not horrible. Definitely not smooth and quiet like stock mounts, but in return you get a completely locked down drivetrain with NO slop or deflection. These are perfect for the street/track enthusiast who doesn't mind a marked increase in vibration from the drivetrain.

NOTE, THIS IS NOT AN OE MOUNT AND ARE NOT AVAILABLE FROM ANY OTHER SOURCE - These are built by an OE supplier to 034Motorsport specifications.

Mounts will fit all B5 chassis cars.  These mounts are recommended for vehicles with increased handling limits, Track Density Subframe mounts will ensure suspension geometry does not change at high suspension loads like OEM do.

INSTALLATION NOTE: Before installing these rubber bushings, put them in a freezer for at least 30 minutes.  Also, some superficial tearing of the rubber ring around the top of the mount is normal when installing these pushings, it won't do it on all depending on how straight they go in, but all the function of the rubber mount is around the center underneath the sleeve, do not be concerned with a little cracking around the top rubber ring of the mount.